Treatex Hardwax Clear Satin Oil is suitable for all types of internal joinery includig floors, stairs, doors and worktops. It is manufactured on a base of natural raw materials including sunflower oil, jojoba oil, carnauba wax, candelilla wax and linseed oil.
Treatex Hardwax Clear Satin Oil is a very durable and odourless water resistant product with high oil and wax content which can cover around 20sqm per liter per coat. Product is also available in 2.5 litre cans.
Preparation: If the surface is rough, sand smooth with 80-120 grit sandpaper. If a previous surface coating fonish is present , sand back to bare wood, again with 80-120 grit sandpaper. Most previously oiled surfaces can be overcoated without sanding. A trial application is required when overcoating previously oiled surface. Make sure that surface to be treated is free of any dirt and dust as well as thoroughly dry. Stir tins and make sure that the product is at room temperature.
Application of Treatex Hardwax Clear Satin Oil: Use a brush or roller to evenly apply product allowing roughly 30g/sqm. Pay particular attention to end grain (on end grain apply wet on wet until oil is no longer absorbed by the wood). Allow to dry for 3-6 hours in warm and ventilated conditions. Apply the second coat of Treatex Hardwax Oil. Allow to dry overnight before the surface is lightly used. The surface will reach maximim hardness after further 24 hours.